Sound Control Technologies RCC-H039-2.0M USB-B + DB9-F Head-End Y-Cable, 2.0 m

Product Overview

The Sound Control Technologies RCC-H039-2.0M is a 2.0-meter head-end Y-cable that breaks a 6-pin mini-DIN connection out to a USB-B connector and a DB9-F serial port, delivering USB 2.0 video plus RS-232 control from an SCT USB camera extension head-end to the host system. SCT lists it for RCU2S extension deployments with the Logitech PTZ Pro 2, making it the factory replacement for that head-end hookup in conference room installations.

Product Description

SCT’s RCU2S kits extend a USB camera up to 300 feet over shielded Cat cable, and the head-end module returns the camera’s USB 2.0 stream and serial control to the room’s codec or PC. The RCC-H039-2.0M makes that final connection: the 6-pin mini-DIN end plugs into the SCT head-end module, the USB-B leg carries the camera’s USB 2.0 signal to the host, and the DB9-F leg exposes RS-232 for camera control from a control processor. The 2.0-meter length gives extra reach when the head-end module and host equipment sit in different parts of the rack or credenza; a 1.0-meter version is available for tighter installations. As a factory Y-cable it matches SCT’s documented pinout, so it should be replaced like-for-like rather than substituted with generic cables. Keep one as a spare for installed RCU2S rooms running Logitech PTZ Pro 2 cameras.

Key Features

• USB 2.0 + Serial Control Y-Cable Carries camera USB video and RS-232 control from one head-end connection per SCT’s published listing.
• 6-Pin Mini-DIN to USB-B + DB9-F Factory connector set for SCT RCU2S head-end modules and host equipment.
• Listed for Logitech PTZ Pro 2 Deployments SCT documents this cable for RCU2S extension systems using the PTZ Pro 2 camera.
• 2.0-Meter Length Extended reach between the head-end module and the host codec or room PC.
• SCT Factory Replacement Wired to SCT head-end pinouts; not interchangeable with generic USB or serial cables.

Technical Specifications