James Loudspeaker PD62-4 – 6.5″ 2-Way Pendant Speaker

Product Overview

The James Loudspeaker PD62-4 is a 6.5″ 2-way pendant speaker built for open-ceiling commercial AV installations that need higher output where in-ceiling mounting is not possible. This hanging pendant loudspeaker suits large exposed-structure retail spaces, restaurants, and atriums. Its 6.5″ 2-way driver array delivers fuller sound than smaller pendants while suspended in the listening area.

Product Description

The PD62-4 is part of the pendant speaker range within the James Loudspeaker collection, pairing a 6.5″ woofer with a dedicated tweeter in a 2-way design housed in a suspended enclosure. The larger driver provides greater output and low-frequency extension than the 4″ PD42-4, supporting bigger open-ceiling spaces and higher playback levels. Because it hangs from the structure, it brings sound closer to listeners where there is no ceiling cavity for flush mounting.

For 70V distributed systems, integrators specify the matching PD62-70 instead, while smaller spaces may use the 4″ PD42-4. As a passive 4-ohm speaker, the PD62-4 integrates cleanly into zoned amplification and multi-room audio. The 2-way configuration balances speech intelligibility and music reproduction for background and foreground audio.

Key Features

• 6.5″ Woofer Delivers greater output and low-frequency extension than smaller pendant models.
• Pendant Mounting Suspends from the structure above for spaces without a ceiling cavity.
• 4-Ohm Operation Runs from standard amplifier channels for clean integration.
• Open-Ceiling Ready Brings sound closer to listeners in large exposed-structure interiors.
• 2-Way Driver Array A woofer and dedicated tweeter deliver balanced full-range sound.

Typical Applications

• Large exposed-structure retail and showrooms
• Restaurants, cafes, and atriums
• Warehouses and open-ceiling interiors
• Distributed audio and multi-zone systems

Technical Specifications

Frequently Asked Questions

What is a pendant speaker?
It is a speaker that hangs from the structure above, used where there is no ceiling cavity for flush mounting.

How does the PD62-4 differ from the PD42-4?
The PD62-4 uses a larger 6.5″ driver for greater output and low-frequency extension.

What is the difference between the PD62-4 and the PD62-70?
The PD62-4 is a 4-ohm model, while the PD62-70 is configured for 70V distributed systems.

Is the PD62-4 passive?
Yes. It is a passive 4-ohm speaker that runs from standard amplifier channels.

Where is the PD62-4 typically used?
It works well in large open-ceiling retail, restaurants, and atriums needing more output.